UltiPower 72V high frequence maintenance chargers unlike traditional chargers, empolying Switchmode Technology Switchmode technology uses compact electronic components. Ideal for heavy load applications such as electric forklift, vehicle, industrial vehicles...Specification:
|Input Voltage||110VAC and 220VAC, 50-60HZ|
|Charging Voltage||88.2V or adjust to battery's specification|
|Humidity||5-95% With package|
|High temperature ambient operating||+40°C,Features OK|
|Low temperature ambient operating||-20°C, Features OK|
|High temperature storage||+70°C,Work normally after recovery under normal temperature for 2 hours|
|Low temperature storage||-40°C,Work normally after recovery under normal temperature for 2 hours|
|Housing material||Cast Iron/ Aluminum|
|Charging mode||Multi-stage (max 8)full automatic switch mode,(reverse) pulse charging|
|Appropriated Battery||72V lead acid battery,AGM,AGL,GEL,VRLA,SLA,FLOODED,WET|
|Certification||CE and RoHS|
Small and light, as we adopt the switch mode technology or called Switching Power Supply technology. Compared withtraditional Linear Power technology, ours is more energy saving as more than 85% electric energy is transferred to battery chemical energy duringcharging process while traditional tech can onlytransfer 40%.The tech is suitable for all types of lead acid batteries (wet,flooded, maintenance free, VRLA, AGL,AGM, GEL, etc)as well as lithium, lipo batteries.
- Compact & Delicate & Energy Saving -- Switch Mode Tech
MCU system is applied. The whole charging process is monitored. Multi-stage charging automatically proceeds. No need for manual interference.Automatically stops charging when the battery is full. You can leave the charger connected to the battery infinitelywithout the risk of overcharging. Once the battery is full, the charger monitors the battery's voltage intermittently. If battery's capacity decreases or voltage drops under set level, the charger can start again to charge battery to its full.
- Automatic-- MCU control
Max 8 stage: pre-charging, soft charging, main charging (bulk charging), secondary charging, high constant voltage charging (absorption charging), 3-minute test, Float charging, End maintenance charging. This way can well transfer electricity into battery according to battery's absorption ability. On the one hand, save energy; on the other hand, protect battery from over-charging, therefore less gassing less temperature rising. Float charging and End maintenance charging also help protect battery and prolong its lifetime.
- Multi-stage charging-- full charge but never overcharge& save battery & save energy
Pulse and reverse pulse technology is applied. The charger generates pulseand reverse pulse to reduce battery'simpedance,gassing and temperature rise,restore the sulfate into liquid to recover battery capacity, therefore to prolong its lifetime. Pulse charging also can help charge fast and fully.Pulse Charging might not be applicable to Lithium, Lipo, Li-ion battery, which need constant current to charge.
- Recover Battery Capacity--Pulse & Reverse Pulse Tech
Our charger has 4-digital display. Digital display will show battery'scharging voltage and current and error code and more information. Floating charging will have time count-down, so that user knows when battery can be ready.Indicator lights can be added and defined as requested.The display can be customized or re-defined.
- Digital Display& Indicator
Tester function: If battery has abnormal state, the charger will display error code and reminds User to check battery whether it is good or bad.Polarity Protection: Prevents the output leads from sparking due to accidental reverseconnection or short circuit.Overcharge and Over-voltage Protection: never worry about overcharging or over-voltage as charger automaticallystops when battery reaches set voltage or currentTemperature Compensation: There is temperature sensor to monitor charging environmental or battery's temperature to tell MCU to adjust charging program for different temperature accordingly. This function allows our charger to charge battery to its full in whatever climate and seasons. (This function needs to know battery's relative parameter and so optional)
- More Protection
We can change parameter to meet different applications. Make charger specifically for your battery.
We have CE and RoHScertification.9. WarrantyWe design our charger for 3 years and offer one-year warranty.
- CE and RoHS